|
Άρ. Substation Hardwares:
£¨1£© Substation speaker
£¨2£© Substation MIC
£¨3£© Substation call key (CALL)
Άς. Technical Parameters:
Output power of ultrathin substation: 250mW
Output power of common/mute/anti-interference substation: 350mW
Common substation dimension: 150x120x65mm(LxWxH)
Ultrathin substation dimension: 90x70x24mm(LxWxH)
Mute/anti-interference substation dimension: 130x110x40mm(LxWxH)
Communication distance: 80m(0.2mm2); 200m(0.5mm2); 300m(0.75mm2);
400m(1.0mm2)
model:LB-A
model:LB-M/LB-K
model:LB-B
Άσ. Installation and Operation:
1. After the connecting installation as the connecting method shown
in the master station connection figure successfully, press the
power switch of master station, the power indictor light will be on
which means the normal state of the power.
2. When you want to send an alarm from substation to master station
and enter the intercom, if there is an alarm from any substation to
the master station (press Alarm key of substation), the
corresponding substation indictor light in the master station will
blink and keep in red, and there will be music alarm with the master
station. The music will not stop till you press the corresponding
switch of the substation in the master station, and the indicator
light will turn to green. At the time, the intercom between master
station and substation is available (press the intercom key in
master station to enter the talk and release the key to listen to
the talk in substation). If there are other alarms from substations
to the master station, the corresponding indicator light of
substation in master station will blink in red without music alarm,
the indicator light of substation will turn to green when you press
the corresponding switch of substation in master station.
3. The substations can be placed on the table or mounted on the
wall.
|